DT3 Digital Tacho
Combined Digital Tacho, Shift Lights and Oil Pressure & Battery Voltage Gauge
The DT3 combines a Digital Tacho with Maximum RPM logging, 8 Shift Lights as well as Oil Pressure and Battery Voltage guages in one instrument. It can log Maximum RPM either maumally or automatically up to 64 times, for reacll in the pits. The display can be operated in four different modes:-
FEATURES
- Digital Tachometer with Maximum RPM recall
- RPM Tell-Tale Display Mode
- Maximum RPM Logging up to 64 times
- 8 LED Shift Lights
- Oil Pressure & Battery Voltage Readout
- Under Pressure & Under/Over Voltage Alarms
- Manual Lap Timer Mode
- Compact Size – 100mm wide x 65 mm tall x 23 mm deep
- 2 Year Parts and Labour Warranty
HOW THE DIGITAL DT3 TACHO WORKS
NORMAL MODE:- the LCD screen displays the present RPM. When the yellow button is pressed the Maximum RPM since the last press is stored in memory.
TELL-TALE MODE:- the LCD screen displays the maximum RPM. Each press of the button clears the maximum RPM and stores it in memory.
AUTO TELL-TALE MODE:- the Maximum RPM is logged every so many seconds. This is ideal for short circuit racing where the driver stays in one gear. If the logging period is set to half the lap time, the maximum RPM is logged for every straight. The LCD operates in Tell-Tale mode and displays the maximum RPM and is reset every Timeout Period.
The tacho is extremely accurate, having a resolution of approximatly 5 RPM at 7000 RPM for a four cylinder engine.The maximum RPMs can be recalled and are retained in memory after powerdown. The 8 Shift Light LED’s can be configured to start and stop at any RPM allowing them to operate within a wide or narrow RPM band.
Oil Pressure and Battery Voltage can be displayed and Low Pressure and Under/Over Voltage alarms are incorporated. When triggered the LED’s flash and the LCD also flashes an apporpriate message.
The DT3 comes with full setting up instructions and technical support is offered. The unit is simple to install and programme.